
- Home
- Components
Components
Precision machined components
We machine components to customer drawings. The categories below group parts by function, with the processes, materials and tolerances that typically matter for each.

Shafts and pins
Drive and pump shafts, axles, pins and threaded shafts where diameters, run-out and cylindricity define the function.
- Typical parts
- Drive and pump shafts, Axles and spindles, Dowel and hinge pins, Threaded shafts and studs
- Processes
- CNC turning, mill-turn, grinding
- Typical materials
- C45, 42CrMo4, 1.4404, EN AW-6082

Bushings, sleeves and spacers
Bushings, sleeves, spacers, distance pieces, rings and discs with controlled bores, wall thickness and face parallelism.
- Typical parts
- Plain and flanged bushings, Sleeves and liners, Spacers and distance pieces, Rings, washers and discs
- Processes
- CNC turning, honing, grinding
- Typical materials
- CuSn12, CW614N, POM-C, 1.4305

Flanges, hubs and couplings
Flanges, hubs, couplings and adapters where bolt-circle position, face flatness and bore concentricity matter.
- Typical parts
- Pipe and machine flanges, Hubs and bosses, Shaft couplings, Adapters and reducers
- Processes
- CNC turning, mill-turn, milling
- Typical materials
- S355, C45, 1.4301, EN AW-6082

Hydraulic and pneumatic components
Valve, pump and cylinder components and manifolds with sealing surfaces, cross-drilled ports and threads.
- Typical parts
- Valve bodies and spools, Pump components, Cylinder heads and pistons, Manifolds and port blocks
- Processes
- Milling, mill-turn, deep-hole drilling, honing
- Typical materials
- 11SMnPb30, 42CrMo4, CW614N, EN AW-6082

Housings and enclosures
Gearbox, bearing and sensor housings and enclosures with bore positions, flatness and sealing faces.
- Typical parts
- Bearing and gearbox housings, Sensor and electronics enclosures, Covers and lids, Machined castings
- Processes
- 3-, 4- and 5-axis milling, boring
- Typical materials
- EN AW-6082, EN AW-7075, cast iron, 1.4404

Brackets and mounting parts
Brackets, mounting plates, clamps, retainers and fastening components for machines and assemblies.
- Typical parts
- Brackets and mounting plates, Clamps and retainers, Fixture and jig parts, Custom fasteners
- Processes
- Milling, 5-axis machining, drilling
- Typical materials
- S235, C45, EN AW-6082, 1.4301

Rollers, pulleys and gear parts
Rollers, pulleys, sprockets and gear blanks where run-out, balance and surface finish affect life and noise.
- Typical parts
- Conveyor and guide rollers, Pulleys and sheaves, Sprockets and gear blanks, Plastic gears and wheels
- Processes
- CNC turning, milling, grinding
- Typical materials
- 42CrMo4, 16MnCr5, PA6, POM-C

Custom machined parts
Any part made to drawing that does not fit a category: prototypes, replacement parts and complex multi-operation components.
- Typical parts
- Prototype parts, Replacement and reverse-engineered parts, Multi-operation complex parts, Assemblies of machined parts
- Processes
- All processes as required
- Typical materials
- Per drawing
Enquiry
Have a drawing to review?
Send your 2D drawing and 3D model with quantities, material and required documents. An engineer reviews manufacturability, tolerances and inspection before quoting.