Dimensioning & tolerancing
| Standard | Scope (summary) |
|---|---|
| ISO 286-1 / -2 | ISO code system for tolerances on linear sizes: standard tolerance grades (IT) and fundamental deviations for holes and shafts; basis of fits such as H7/g6. |
| ISO 2768-1 / -2 | General tolerances for linear and angular dimensions (part 1: f, m, c, v) and for geometrical features without individual indications (part 2: H, K, L). Part 2 is being superseded by ISO 22081. |
| ISO 22081 | General geometrical specifications and general size specifications; the GPS replacement concept for ISO 2768-2. |
| ISO 1101 | Geometrical tolerancing — form, orientation, location and run-out; symbols, tolerance frames and their interpretation. |
| ISO 5459 | Datums and datum systems: how datum features are established and how a datum reference frame constrains a part. |
| ISO 8015 | Fundamental GPS concepts, including the independency principle as the default between size and geometry. |
| ISO 14405-1 | Dimensional tolerancing of linear sizes, including specification modifiers such as two-point size (LP) and envelope requirement (Ⓔ). |
| ISO 2692 | Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement. |
| ISO 13715 | Indication of edges of undefined shape: burr, sharp edge and undercut tolerances on drawings. |
| ISO 128 / ISO 129-1 | General principles of presentation on technical drawings and of dimensioning. |
| ASME Y14.5 | US standard for dimensioning and tolerancing (GD&T). Similar symbols to ISO, but different default rules (e.g. Rule #1 envelope principle). |
Surface texture
| Standard | Scope (summary) |
|---|---|
| ISO 21920-1 / -2 / -3 | Current ISO standard for surface texture profile: drawing indication (part 1), terms and parameters (part 2), specification operators (part 3). Replaces ISO 1302 and ISO 4287/4288. |
| ISO 1302 | Former standard for indicating surface texture on drawings (withdrawn, replaced by ISO 21920-1). Still widely found on existing drawings, including N-grades. |
| ISO 4287 / ISO 4288 | Former profile-method standards defining Ra, Rz and measurement rules (replaced by ISO 21920-2/-3; still referenced in many specifications). |
| ASME B46.1 | US standard for surface texture (roughness, waviness and lay). |
Threads
| Standard | Scope (summary) |
|---|---|
| ISO 68-1 / ISO 261 | ISO general-purpose metric screw threads: basic profile (68-1) and general plan of diameters and pitches (261). |
| ISO 965-1 | ISO metric threads tolerance system — tolerance classes such as 6H (internal) and 6g (external). |
| ISO 228-1 | Parallel pipe threads where pressure-tight joints are not made on the threads (G threads). |
| ISO 7-1 | Pipe threads where pressure-tight joints are made on the threads (R / Rp / Rc). |
| ASME B1.1 | Unified inch screw threads (UN, UNC, UNF) and thread classes 1A–3A / 1B–3B. |
| ASME B1.20.1 | Pipe threads, general purpose, inch (NPT). |
Materials, certificates & hardness
| Standard | Scope (summary) |
|---|---|
| EN 10204 | Types of inspection documents for metallic products: 2.1, 2.2, 3.1 and 3.2. The 3.1 certificate is the usual minimum for traceable machined parts. |
| EN 10083-2 / -3 | Steels for quenching and tempering — non-alloy (e.g. C45) and alloy grades (e.g. 42CrMo4, 34CrNiMo6). |
| EN 10084 | Case-hardening steels (e.g. 16MnCr5, 20MnCr5). |
| EN 10087 | Free-cutting steels (e.g. 11SMn30, 11SMnPb30). |
| EN 10088-3 | Stainless steels — semi-finished products, bars, rods, wire and sections for general purposes. |
| EN 573-3 / EN 755-2 | Aluminium: chemical composition and designation of wrought products (573-3); extruded rod, bar, tube — mechanical properties (755-2). |
| EN 12164 | Copper and copper alloys — rod for free machining purposes (e.g. CuZn39Pb3, CW614N). |
| EN 1561 / EN 1563 | Founding: grey cast irons (1561) and spheroidal graphite cast irons (1563). |
| ASTM A276 / A479 | Stainless steel bars and shapes (A276) and stainless bars for boilers and pressure vessels (A479). |
| ASTM B348 | Titanium and titanium alloy bars and billets (grades 1–5, 23 and others). |
| ASTM F136 / ISO 5832-3 | Wrought Ti-6Al-4V ELI for surgical implant applications (ASTM F136; ISO 5832-3 is the ISO counterpart). |
| ISO 6506 / 6507 / 6508 | Metallic materials hardness testing: Brinell (6506), Vickers (6507) and Rockwell (6508). |
Quality management & approval
| Standard | Scope (summary) |
|---|---|
| ISO 9001 | Quality management systems — requirements. |
| IATF 16949 | Automotive quality management system requirements, built on ISO 9001. |
| EN 9100 / AS9100 | Quality management systems for aviation, space and defence organisations. |
| ISO 13485 | Quality management systems for medical devices. |
| AS9102 / EN 9102 | Aerospace first article inspection (FAI) requirements and forms. |
| AIAG PPAP / VDA 2 | Production part approval process (AIAG) and the German VDA volume 2 equivalent (PPA). |
| ISO 2859-1 | Sampling procedures for inspection by attributes, indexed by acceptance quality limit (AQL). |
| ISO/IEC 17025 | Competence of testing and calibration laboratories. |
| AQAP 2110 | NATO quality assurance requirements for design, development and production. |
| ISO/TS 22163 | Railway applications — quality management system requirements (railway sector application of ISO 9001). |
Sector & regulatory references
| Standard | Scope (summary) |
|---|---|
| ISO 15156 / NACE MR0175 | Materials for use in H₂S-containing environments in oil and gas production (sour service), including hardness limits. |
| API 6A / API 6D | Wellhead and christmas-tree equipment (6A) and pipeline valves (6D). |
| PED 2014/68/EU | EU Pressure Equipment Directive — conformity of pressure equipment and assemblies. |
| ATEX 2014/34/EU | EU directive for equipment intended for use in potentially explosive atmospheres. |
| EU 2023/1230 (Machinery) | EU Machinery Regulation (replacing Directive 2006/42/EC from January 2027). |
| ISO 10218-1 / -2 | Safety requirements for industrial robots (part 1) and robot systems and integration (part 2). |
| ISO 9409-1 | Manipulating industrial robots — mechanical interfaces: round flanges. |
| ISO 4413 / ISO 4414 | Safety rules for hydraulic (4413) and pneumatic (4414) fluid power systems. |
| EC 1935/2004 | EU framework regulation for materials and articles intended to come into contact with food. |
| EHEDG / 3-A | Hygienic design guidelines (EHEDG, Europe) and sanitary standards (3-A, USA) for food processing equipment. |
| ISO 10993-1 | Biological evaluation of medical devices — evaluation and testing within a risk management process. |
| EN 45545-2 | Railway applications — fire protection of railway vehicles; requirements for fire behaviour of materials. |
| EN 15085 | Railway applications — welding of railway vehicles and components. |
| Class rules (DNV, LR, ABS, BV) | Rules of marine classification societies for materials, components and their certification. |
| ISO 730 / ISO 500 | Agricultural tractors: rear-mounted three-point linkage (730) and power take-off (500). |
| RoHS 2011/65/EU · REACH | EU restriction of hazardous substances in electrical and electronic equipment (RoHS) and chemicals regulation (REACH). Relevant e.g. to lead in free-machining brass and steel. |
| IEC 60529 | Degrees of protection provided by enclosures (IP code). |
| ASME BPVC | ASME Boiler and Pressure Vessel Code (sections relevant to boilers, pressure vessels and materials). |
| ISO 21940-11 | Mechanical vibration — rotor balancing: balance quality requirements for rotors in a constant (rigid) state (formerly ISO 1940-1). |
Summaries are informal descriptions written for orientation. Always work to the edition named in the drawing, contract or purchase order. Listing a standard does not mean MACHINING.TR holds a certification against it.