MACHINING.TRPrecision Machining. Engineered in Turkey.
Batch of turned stainless steel rings
  1. Home
  2. Industries
  3. Marine

Marine

Marine components must resist seawater, vibration and mechanical loads.

Ships, workboats and offshore installations use machined bronze, duplex and stainless parts in propulsion, steering, deck equipment and seawater systems. Classification rules may require approved materials and certificates.

Typical machined components

  • Propeller shaft components
  • Rudder stock parts and bushings
  • Seawater valve and pump parts
  • Deck hardware
  • Stern tube and seal parts
  • Couplings and flanges
Batch of turned stainless steel rings
Batch of turned stainless steel rings

Common materials

  • CuAl10Ni5Fe4
  • 1.4462 (2205)
  • 1.4404 (316L)
  • Alloy 400
  • EN AW-5083
  • Ti Grade 2

Materials · Material Equivalents

Manufacturing processes

Machining challenges

  • Nickel-aluminium bronze and duplex machinability
  • Large shaft components
  • Galvanic compatibility
  • Class certificates

Dimensional requirements

Bearing and seal fits per ISO 286; tapers and keyways to standards.

Surface finish requirements

Seal zones Ra 0.4–0.8 µm; general surfaces Ra 3.2 µm.

Inspection requirements

Dimensional reports, PMI, certificates 3.1 or 3.2; class surveyor witness can be arranged on request.

Relevant standards

Class rules (DNV, LR, ABS, BV)Rules of marine classification societies for materials, components and their certification.
EN 10204Types of inspection documents for metallic products: 2.1, 2.2, 3.1 and 3.2. The 3.1 certificate is the usual minimum for traceable machined parts.
ISO 228-1Parallel pipe threads where pressure-tight joints are not made on the threads (G threads).
ISO 2768-1 / -2General tolerances for linear and angular dimensions (part 1: f, m, c, v) and for geometrical features without individual indications (part 2: H, K, L). Part 2 is being superseded by ISO 22081.
ISO 9001Quality management systems — requirements.

Engineering considerations

  • Select materials for galvanic compatibility
  • Specify class requirements upfront
  • Define sealing-surface finish
  • Plan protective packaging

Potential manufacturing solutions

Turning and milling with coordinated material certification and class inspection on request.

Requirements depend on the specific part, drawing and customer specification. Sector approvals or certifications are not implied; where a project requires them, this is confirmed during the RFQ review.

Enquiry

Have a drawing to review?

Send your 2D drawing and 3D model with quantities, material and required documents. An engineer reviews manufacturability, tolerances and inspection before quoting.

What to include in your enquiry