Heat treatments
| Treatment | Purpose | Typical materials | Dimensional effect |
|---|---|---|---|
| Stress relieving | Reduce distortion | Steels, weldments, aluminium plate | Small; best before finishing |
| Through hardening + tempering | Strength, wear | 42CrMo4, 100Cr6, tool steels | Distortion; finish grind if tight |
| Case hardening | Hard surface, tough core | 16MnCr5, 20MnCr5 | Distortion; grind functional surfaces |
| Induction hardening | Local hard zones | C45, 42CrMo4 | Local; mask threads/holes |
| Nitriding | Wear, fatigue, low distortion | 42CrMo4, 34CrNiMo6, tool steels | Very small growth |
| Precipitation hardening | Strength in PH stainless / Ni alloys | 17-4PH, Alloy 718 | Slight shrinkage |
Surface treatments
| Treatment | Materials | Notes |
|---|---|---|
| Anodising (type II, hard type III) | Aluminium | Layer partly grows into, partly out of the surface; mask fits and threads |
| Chemical conversion (e.g. chromate-free) | Aluminium | Thin, conductive, paint base |
| Electroless nickel | Steel, aluminium, copper | Uniform thickness, wear and corrosion |
| Zinc and zinc-nickel plating | Steel | Corrosion protection; hydrogen embrittlement relief for high strength |
| Passivation | Stainless steel | Removes free iron, restores passive layer |
| Black oxide / phosphating | Steel | Mild protection, oil-retaining |
| Painting / powder coating | Steel, aluminium | Mask functional surfaces |
Planning rules
- State the treatment specification and layer thickness on the drawing.
- Declare whether dimensions apply before or after treatment.
- Define masking for threads, fits and electrical contact areas.
- For high-strength steels, specify hydrogen embrittlement relief after plating.
Delivered through partners
Heat and surface treatments are carried out by qualified partner companies. We specify the process, check certificates and inspect parts after treatment.
