Filling, mixing, cutting and conveying equipment uses machined stainless and plastic parts. Cleanability, smooth surfaces and compliant materials are central.
Typical machined components
- Filling nozzles and valves
- Pump rotors and housings
- Conveyor parts
- Cutting heads and blades holders
- Sanitary fittings
- Plastic guides and star wheels

Common materials
Materials · Material Equivalents
Manufacturing processes
Machining challenges
- Smooth, crevice-free surfaces
- Stainless work hardening
- Food-contact plastics
- Passivation and cleanliness
Dimensional requirements
Fits per drawing; hygienic design favours generous radii.
Surface finish requirements
Product-contact surfaces often Ra ≤ 0.8 µm; polishing or electropolishing.
Inspection requirements
Roughness measurement, visual inspection and material declarations.
Relevant standards
| EC 1935/2004 | EU framework regulation for materials and articles intended to come into contact with food. |
| EHEDG / 3-A | Hygienic design guidelines (EHEDG, Europe) and sanitary standards (3-A, USA) for food processing equipment. |
| ISO 21920-1 / -2 / -3 | Current ISO standard for surface texture profile: drawing indication (part 1), terms and parameters (part 2), specification operators (part 3). Replaces ISO 1302 and ISO 4287/4288. |
| EN 10088-3 | Stainless steels — semi-finished products, bars, rods, wire and sections for general purposes. |
| EN 10204 | Types of inspection documents for metallic products: 2.1, 2.2, 3.1 and 3.2. The 3.1 certificate is the usual minimum for traceable machined parts. |
Engineering considerations
- Use radii instead of sharp corners
- Specify Ra on product-contact surfaces
- Request food-contact declarations
- Avoid free-machining grades where unsuitable
Potential manufacturing solutions
Turning and milling with polishing and passivation coordinated through partners.
Requirements depend on the specific part, drawing and customer specification. Sector approvals or certifications are not implied; where a project requires them, this is confirmed during the RFQ review.