MACHINING.TRPrecision Machining. Engineered in Turkey.
CNC turning centre in a machining workshop
  1. Home
  2. Industries
  3. Industrial machinery

Industrial machinery

Machine builders need dependable machined parts across a broad mix of sizes, materials and volumes.

Industrial machinery covers packaging, textile, printing, woodworking and processing equipment. Parts range from simple plates to precise spindles and gear housings, often combined with welded frames or castings.

Typical machined components

  • Shafts and spindles
  • Gear blanks and pulleys
  • Bearing housings
  • Base plates and machine frames
  • Guide blocks and slides
  • Cams, levers and linkages
CNC turning centre in a machining workshop
CNC turning centre in a machining workshop

Common materials

  • C45
  • 42CrMo4
  • S355J2
  • EN-GJL-250
  • CuSn8
  • PA 6

Materials · Material Equivalents

Manufacturing processes

Machining challenges

  • Wide part mix in small and medium batches
  • Machining welded frames after stress relief
  • Bearing fits and alignment over long distances
  • Coordinating heat treatment and grinding

Dimensional requirements

Bearing fits per ISO 286 (e.g. H7, k6); parallelism and perpendicularity between mounting faces; general tolerances ISO 2768-mK.

Surface finish requirements

Ra 0.8–1.6 µm for bearing seats and sliding surfaces; Ra 3.2 µm for general surfaces.

Inspection requirements

Dimensional inspection of fits and geometrical features, hardness after heat treatment and certificates on request.

Relevant standards

ISO 2768-1 / -2General tolerances for linear and angular dimensions (part 1: f, m, c, v) and for geometrical features without individual indications (part 2: H, K, L). Part 2 is being superseded by ISO 22081.
ISO 286-1 / -2ISO code system for tolerances on linear sizes: standard tolerance grades (IT) and fundamental deviations for holes and shafts; basis of fits such as H7/g6.
ISO 1101Geometrical tolerancing — form, orientation, location and run-out; symbols, tolerance frames and their interpretation.
EU 2023/1230 (Machinery)EU Machinery Regulation (replacing Directive 2006/42/EC from January 2027).
EN 10204Types of inspection documents for metallic products: 2.1, 2.2, 3.1 and 3.2. The 3.1 certificate is the usual minimum for traceable machined parts.

Engineering considerations

  • Use standard bearing fits and thread sizes
  • Specify which faces are functional
  • Combine parts where welding or casting is cheaper
  • Define corrosion protection

Potential manufacturing solutions

CNC milling and turning combined with fabrication, casting and surface treatment in our manufacturing network — machining as part of a complete component supply.

Requirements depend on the specific part, drawing and customer specification. Sector approvals or certifications are not implied; where a project requires them, this is confirmed during the RFQ review.

Enquiry

Have a drawing to review?

Send your 2D drawing and 3D model with quantities, material and required documents. An engineer reviews manufacturability, tolerances and inspection before quoting.

What to include in your enquiry