Thread terms
Methods compared
| Method | Best for | Advantages | Limitations |
|---|---|---|---|
| Cutting taps | Small to medium internal threads | Fast, simple | Chip control in blind holes, tap breakage |
| Forming taps | Ductile materials | No chips, strong thread | Larger pre-drill, not for brittle materials |
| Thread milling | Large, hard or valuable parts | One tool, many sizes; safe breakage | Longer cycle |
| Thread turning | External and large internal threads | Any profile, high accuracy | Single-point, multiple passes |
| Thread rolling | High volume external threads | Strength, finish | Specific tooling |
Common thread systems
- ISO metric (M), coarse and fine pitch — ISO 68-1, ISO 261, tolerance classes per ISO 965 (6H/6g standard).
- Unified inch (UNC, UNF) — ASME B1.1, classes 2A/2B, 3A/3B.
- Pipe threads — parallel G (ISO 228-1), tapered R/Rc (ISO 7-1), NPT (ASME B1.20.1).
- Trapezoidal (Tr) and special forms on request.
Gauging and inspection
Threads are verified with GO/NO-GO plug and ring gauges of the specified class; pitch diameter can be measured with thread wires when required. Specify thread depth as full thread depth, not drill depth.
