Pump and valve manufacturers often combine castings with machined bar parts. Sealing surfaces, bearing fits and threads determine function; materials must match the media.
Typical machined components
- Pump shafts and sleeves
- Impellers and wear rings
- Valve bodies and bonnets
- Stems, seats and discs
- Mechanical seal parts
- Pipe connection fittings

Common materials
Materials · Material Equivalents
Manufacturing processes
Machining challenges
- Machining castings with variable allowances
- Sealing faces with flatness and finish
- Threads per ISO 228 / NPT
- Duplex and bronze machinability
Dimensional requirements
Bearing and seal fits per ISO 286; flatness and perpendicularity on sealing faces; threads with gauges.
Surface finish requirements
Seal faces Ra 0.4–0.8 µm or lapped; shafts Ra 0.4–0.8 µm in seal zones.
Inspection requirements
Dimensional reports, hardness, PMI and hydrostatic testing via partners where required.
Relevant standards
| ISO 228-1 | Parallel pipe threads where pressure-tight joints are not made on the threads (G threads). |
| ASME B1.20.1 | Pipe threads, general purpose, inch (NPT). |
| PED 2014/68/EU | EU Pressure Equipment Directive — conformity of pressure equipment and assemblies. |
| API 6A / API 6D | Wellhead and christmas-tree equipment (6A) and pipeline valves (6D). |
| EN 10204 | Types of inspection documents for metallic products: 2.1, 2.2, 3.1 and 3.2. The 3.1 certificate is the usual minimum for traceable machined parts. |
Engineering considerations
- Define machining allowance on castings
- Specify sealing-face finish and lay
- Choose materials suited to media
- Specify pressure-test requirements
Potential manufacturing solutions
Casting supply via partner foundries, machining of critical features, and coordinated testing.
Requirements depend on the specific part, drawing and customer specification. Sector approvals or certifications are not implied; where a project requires them, this is confirmed during the RFQ review.