Medical work spans surgical instrument parts, equipment mechanisms and device components. Many are small, slender turned parts suited to Swiss-type machining; others are complex milled housings. The device manufacturer remains responsible for regulatory compliance, while the supplier controls materials, process and documentation.
Typical machined components
- Instrument shafts and tips
- Bone-screw-type threaded parts (to customer design)
- Equipment housings and frames
- Dental and orthopaedic tooling
- Fluidic connectors
- Small precision pins and bushings

Common materials
Materials · Material Equivalents
Manufacturing processes
Machining challenges
- Micro-features and slender parts
- Burr-free, clean surfaces and edges
- Titanium and PEEK with specific tooling
- Lot traceability and cleaning
Dimensional requirements
Small features often carry tolerances of ±0.01 mm or tighter; datum structures must be practical for measurement.
Surface finish requirements
Ra 0.2–0.8 µm on functional surfaces; polishing, electropolishing or passivation specified by the customer.
Inspection requirements
Optical and CMM measurement, 100 % visual inspection under magnification where required, lot traceability and material certificates.
Relevant standards
| ISO 13485 | Quality management systems for medical devices. |
| ISO 10993-1 | Biological evaluation of medical devices — evaluation and testing within a risk management process. |
| ASTM F136 / ISO 5832-3 | Wrought Ti-6Al-4V ELI for surgical implant applications (ASTM F136; ISO 5832-3 is the ISO counterpart). |
| ISO 21920-1 / -2 / -3 | Current ISO standard for surface texture profile: drawing indication (part 1), terms and parameters (part 2), specification operators (part 3). Replaces ISO 1302 and ISO 4287/4288. |
| EN 10204 | Types of inspection documents for metallic products: 2.1, 2.2, 3.1 and 3.2. The 3.1 certificate is the usual minimum for traceable machined parts. |
Engineering considerations
- Specify medical material grade and standard
- Define cleaning and packaging level
- Avoid unnecessary micro-radii
- Clarify validation requirements
Potential manufacturing solutions
Swiss-type turning and 5-axis milling through qualified capacity, coordinated passivation and documented inspection. ISO 13485 requirements are reviewed per project.
Requirements depend on the specific part, drawing and customer specification. Sector approvals or certifications are not implied; where a project requires them, this is confirmed during the RFQ review.