Drilling: speed, feed & time
Spindle speed n [rpm]
Feed rate vf [mm/min]
Metal removal rate Q [cm³/min]
Drilling time incl. point [s]
n = vc × 1000 / (π × D)
vf = n × f
Q = π·D²/4 × vf / 1000
t = (depth + D / (2·tan(σ/2))) / vf
vf = n × f
Q = π·D²/4 × vf / 1000
t = (depth + D / (2·tan(σ/2))) / vf
Calculated values are theoretical starting points. Confirm with the tool manufacturer’s data and machine limits.
Notes
For deep holes (above about 5 × D with standard drills) consider peck cycles, through-coolant drills or pilot holes. Feed per revolution scales roughly with drill diameter; small drills need proportionally lower feeds.