Roughness converter
Ra in microinches [µin]
Nearest ISO 1302 N-grade
Ra of that grade [µm]
Indicative Rz, lower (≈ 4 × Ra) [µm]
Indicative Rz, upper (≈ 7 × Ra) [µm]
1 µm = 39.37 µin
There is no exact Ra↔Rz conversion; the ratio depends on the profile. Specify the parameter you need on the drawing.
There is no exact Ra↔Rz conversion; the ratio depends on the profile. Specify the parameter you need on the drawing.
Calculated values are theoretical starting points. Confirm with the tool manufacturer’s data and machine limits.
| Roughness grade | Ra (µm) | Ra (µin, approx.) | Typical achievable by |
|---|---|---|---|
| N12 | 50 | 1,968 | Sawing, flame cutting, rough forging |
| N11 | 25 | 984 | Sawing, flame cutting, rough forging |
| N10 | 12.5 | 492 | Rough turning / milling |
| N9 | 6.3 | 248 | Rough turning / milling |
| N8 | 3.2 | 126 | Standard turning / milling |
| N7 | 1.6 | 63 | Finish turning / milling, reaming |
| N6 | 0.8 | 31 | Fine finishing, grinding |
| N5 | 0.4 | 16 | Grinding, honing |
| N4 | 0.2 | 8 | Lapping, superfinishing, polishing |
| N3 | 0.1 | 4 | Lapping, superfinishing, polishing |
| N2 | 0.05 | 2 | Lapping, polishing |
| N1 | 0.025 | 1 | Lapping, polishing |
Notes
Ra and Rz measure different things; any conversion between them is only indicative. If your function depends on peaks (sealing, wear), specify Rz or Rmax explicitly. More in surface finish.