MACHINING.TRPrecision Machining. Engineered in Turkey.
  1. Home
  2. Knowledge
  3. Calculators
  4. Milling Calculator

Calculator

Milling speed & feed calculator

Enter cutting speed, cutter diameter, number of teeth and feed per tooth to get spindle speed, feed rate, metal removal rate and mean chip thickness.

Milling: speed, feed & MRR

Spindle speed n [rpm]—
Feed rate vf [mm/min]—
Metal removal rate Q [cm³/min]—
Mean chip thickness hm [mm]—
Cutting time (one pass) [min]—
n = vc × 1000 / (π × D)
vf = n × z × fz
Q = ae × ap × vf / 1000
hm = 360·ae·fz / (π·D·arccos(1 − 2ae/D)) [κr = 90°]
t = L / vf

Calculated values are theoretical starting points. Confirm with the tool manufacturer’s data and machine limits.

How to use it

Start with the cutting speed and feed per tooth recommended by the tool supplier for your material. The mean chip thickness shows the effect of radial engagement: at small ae the real chip becomes thinner than fz, so feed can be increased to keep the edge cutting rather than rubbing.

Formulas

Spindle speed
n = vc × 1000 / (π × D)
Feed rate
vf = n × z × fz
Metal removal rate
Q = ae × ap × vf / 1000 (cm³/min)
Mean chip thickness
hm = 360 · ae · fz / (π · D · arccos(1 − 2ae/D)) for κr = 90°

Enquiry

Have a drawing to review?

Send your 2D drawing and 3D model with quantities, material and required documents. An engineer reviews manufacturability, tolerances and inspection before quoting.

What to include in your enquiry